Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

boiler cleaning tools

nytech28
nytech28 Member Posts: 99
edited February 2022 in Strictly Steam
 hay techs, I came across few boilers with the heat exchangers dirty causing flame to roll back or cause spark ignitor to not work, any cleaning tools out there to clean heat exchanger on a standard boiler ? 

Comments

  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 18,722
    just your standard cleaning brushes and a soot vac for CI boilers
    delcrossv
  • offdutytech
    offdutytech Member Posts: 209
    Maybe a saw saw if it's really bad. N95 is probably a wise idea to wear. 

    Owner of Grunaire Climate Solutions. Check us out under the locate a contractor section. Located in Detroit area.

    kcoppcross_skierHap_Hazzard
  • Jells
    Jells Member Posts: 630
    EBEBRATT-Ed said:

    just your standard cleaning brushes and a soot vac for CI boilers

    Is there a trick to cleaning the combustion chamber without the vac pulling out all the insulation? My 5hp Ridgid vac with a bag inside did great for the CI plates, there was no soot in the air. But I was wondering if it was too powerful for the chamber.

Categories