Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Balancing valves
Options

Steve_210
Member Posts: 647
Balancing valves

Who makes these just looking for the test kit


Who makes these just looking for the test kit

0
Comments
-
What do you mean who makes them? Tour & Andersson is right on the tag in your hand0
-
Any brand of pressure differential meter will connect to those PT ports you see
Look up the manual for the valve for setting info
I think T/A is part of Victraulic now?
Dwyer, B&G, have meters available they are $$&Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
Thanks I have the backflow prevention test kit but I’m not sure if this can be used
Is there a number for anybody I could discuss this with0 -
Maybe a rep for The Victaulic when I Google it it brings me to Victaulic0
-
Any pressure differential meter will work, but you need the T/A chart to convert the reading to GPM. Most meters are digital now.
Plenty of T/A You Tube vids showing how to balance their valves.
The Victraulic site should have a T/A section, like this
http://www.researchairflo.com/wp-content/uploads/2014/09/TA-Tour-Andersson-Balancing-Valves.pdfBob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 116 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 109 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 990 Plumbing
- 6.3K Radiant Heating
- 389 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements