Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Dunkirk
Options
PDC1
Member Posts: 1
in Oil Heating
So I have a Dunkirk Gas hot Water Boiler with a honeywell s9361a2070 Control
I am showing Sta 1 with no error codes, the Draft motor does not start but I know it is good, I put voltage to it and it went on
Please Help Rob
I am showing Sta 1 with no error codes, the Draft motor does not start but I know it is good, I put voltage to it and it went on
Please Help Rob
0
Comments
-
need pictures and a wiring diagram if you can post it0
-
Sta= Stable, which means it's just waiting.
Check the thermostat and where the thermostat connects on the Honeywell control.0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements