Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Wera Wrenches

Options
Alan (California Radiant) Forbes
Alan (California Radiant) Forbes Member Posts: 4,640
edited October 2021 in THE MAIN WALL
I just ordered a couple of these. Has anyone tried them out? Larry?

8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

Two btu per sq ft for degree difference for a slab

Comments

  • ratio
    ratio Member Posts: 4,176
    Looks expensive. Let us know how they work.
  • Larry Weingarten
    Larry Weingarten Member Posts: 4,005
    Hi @Alan (California Radiant) Forbes , I didn't even know about this wrench! :o It looks like fun. I see Wera makes lots of tools. The only thing I have that's sort of similar is an Eifel Plierench.
    I'm curious to know how well your new tool holds the nut or bolt head, and how well it works in tight spaces.

    Yours, Larry
  • ChrisJ
    ChrisJ Member Posts: 17,067
    I always thought Wera was a cheap knockoff of Wiha which makes really good tools.

    Maybe my assumption has been wrong?

    Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.

Categories