Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Combustion analysis
Options
rgar98
Member Posts: 59
I cannot find an independent oil technician in Montgomery County Maryland (Silver Spring) to do an analysis of my oil burner set-up. The "Find a Contractor" link is not helpful.
0
Comments
-
What about the company from where you buy your oil?steve0
-
@Steamhead Is this in your area?Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment0
-
We don't usually go down that far..... @rgar98 , how about @Dan Foley ? If his company, Foley Mechanical, doesn't do this he probably knows someone............ChrisJ said:@Steamhead Is this in your area?
All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting1 -
I cover VA, MD, and DC from Richmond up to Hagerstown / Baltimore. And a little bit of PA.
But I do commercial and industrial boilers. I have a ton of customers in Silver Spring.
+1 for Dan Foley. If Dan can’t do it for some reason let me know and I will help you out.Never stop learning.0 -
Thanks Mike, I appreciate that.0
-
There is a company in Silver Springs called D&D Services. Not sure if they do oil but they have been certified by NCI on Combustion testing. Foley are good guys too,0
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements