Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Combustion analysis

rgar98 Member Posts: 59
edited August 2021 in Oil Heating
I cannot find an independent oil technician in Montgomery County Maryland (Silver Spring) to do an analysis of my oil burner set-up. The "Find a Contractor" link is not helpful.


  • STEVEusaPA
    STEVEusaPA Member Posts: 6,505
    What about the company from where you buy your oil?

    There was an error rendering this rich post.

  • ChrisJ
    ChrisJ Member Posts: 15,767
    @Steamhead Is this in your area?
    Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment
  • Steamhead
    Steamhead Member Posts: 16,886
    ChrisJ said:

    @Steamhead Is this in your area?

    We don't usually go down that far..... @rgar98 , how about @Dan Foley ? If his company, Foley Mechanical, doesn't do this he probably knows someone............
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
  • Mike_Sheppard
    Mike_Sheppard Member Posts: 696
    edited August 2021
    I cover VA, MD, and DC from Richmond up to Hagerstown / Baltimore. And a little bit of PA.

    But I do commercial and industrial boilers. I have a ton of customers in Silver Spring.

    +1 for Dan Foley. If Dan can’t do it for some reason let me know and I will help you out. 
    Never stop learning.
  • rgar98
    rgar98 Member Posts: 59
    Thanks Mike, I appreciate that.
  • captainco
    captainco Member Posts: 796
    There is a company in Silver Springs called D&D Services. Not sure if they do oil but they have been certified by NCI on Combustion testing. Foley are good guys too,