Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
well mclain boiler ignition issue
Options
nytech28
Member Posts: 67
in Gas Heating
have a technician friend on a job site saying that hes working on a well mclain boiler & the module is giving flame failure led , he replaces the polite assembly which include spark, flame sensor & polite, but hes still getting the same issue ,can this be most likely, the module faulty if he repalced the polite assembly already, I will attach the boiler info & module model ,any information would help.so I can help him. well mclain module # 1135-605
0
Comments
-
Could be several things, bad module, bad flame sensor or flame sensor wire, grounding. Have the tech call tech services 800-654-2109.0
-
Make sure you have the grounding tight and clean. Also check the flame signal with a meter0
-
I did advise him over the phone ,to double check grounding & sensor signal ,thanks for the quick respond guys0
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 130 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements