Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Fields controls auto damper wiring help
Options
BestJersey
Member Posts: 1
in Gas Heating
Good evening,
My d80d auto damper died after a long life. I have a Utica m150agb boiler. I ordered a fields gvd 7 pl as a replacement with the wiring kit. I need help connecting the aquastat wiring to the new damper. The aquastat is a L1848E and does not accept the molex from the kit. I’ve done a bit of googling and I cannot determine the correct terminals to connect the four wires from the damper to my system. Your help is appreciated.
My d80d auto damper died after a long life. I have a Utica m150agb boiler. I ordered a fields gvd 7 pl as a replacement with the wiring kit. I need help connecting the aquastat wiring to the new damper. The aquastat is a L1848E and does not accept the molex from the kit. I’ve done a bit of googling and I cannot determine the correct terminals to connect the four wires from the damper to my system. Your help is appreciated.
0
Comments
-
Ultimately, the damper and aquastat are not compatible. The damper was removed.0
-
Sorry just read this posting there is a way to wire it.0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 160 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 848 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements