Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Honeywell primary & Allanson transformer

Options
rgar98
rgar98 Member Posts: 66
in Oil Heating
Hello,
Is the Honeywell R7284U primary running in interrupted mode (used in an oil , forced air system), compatible with the 2721-628G Allanson transformer? I'm replacing a an old Beckett ignitor.
Thanks.
RG

Comments

  • BDR529
    BDR529 Member Posts: 372
    edited November 2020
    SHOULD work just fine.
    SuperTech
  • rgar98
    rgar98 Member Posts: 66
    edited November 2020
    Thanks, I appreciate your response. I was concerned b/c I have a transformer in my furnace and NOT an electronic ignitor.
  • STEVEusaPA
    STEVEusaPA Member Posts: 6,505
    That transformer may out last the furnace.

    There was an error rendering this rich post.

    MaxMercy
  • MaxMercy
    MaxMercy Member Posts: 550
    With an interrupted primary either one will last nearly forever.
    SuperTech
  • SuperTech
    SuperTech Member Posts: 2,633
    And if your electrodes are in good shape they should never need replacement using interrupted ignition. I like to setup all my oil burners to use interrupted ignition. 
    STEVEusaPAMaxMercy

Categories