Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Honeywell primary & Allanson transformer

Options
rgar98
rgar98 Member Posts: 59
in Oil Heating
Hello,
Is the Honeywell R7284U primary running in interrupted mode (used in an oil , forced air system), compatible with the 2721-628G Allanson transformer? I'm replacing a an old Beckett ignitor.
Thanks.
RG

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Comments

  • BDR529
    BDR529 Member Posts: 346
    edited November 2020
    SHOULD work just fine.
    SuperTech
  • rgar98
    rgar98 Member Posts: 59
    edited November 2020
    Thanks, I appreciate your response. I was concerned b/c I have a transformer in my furnace and NOT an electronic ignitor.
  • STEVEusaPA
    STEVEusaPA Member Posts: 6,505
    That transformer may out last the furnace.

    There was an error rendering this rich post.

    MaxMercy
  • MaxMercy
    MaxMercy Member Posts: 546
    With an interrupted primary either one will last nearly forever.
    SuperTech
  • SuperTech
    SuperTech Member Posts: 2,605
    And if your electrodes are in good shape they should never need replacement using interrupted ignition. I like to setup all my oil burners to use interrupted ignition. 
    STEVEusaPAMaxMercy

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories