ZVC404, 2tstats, 3 zones
Options
shamu1023
Posts: 10
So, I have 3 zones and 2 tstats. I purchased a ZVC404 to clean things up.
If I want 1 tstat to call 2 zones, whats the best way to do that?
Zone valves are Honeywell V8043F.
Thanks.
a) jumper 2 tstats, and put each zone on its own.
b) wire zone valves in series or parallel?
If I want 1 tstat to call 2 zones, whats the best way to do that?
Zone valves are Honeywell V8043F.
Thanks.
a) jumper 2 tstats, and put each zone on its own.
b) wire zone valves in series or parallel?
0
Comments
-
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab1
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 133 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements