Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
ZVC404, 2tstats, 3 zones
Options
shamu1023
Member Posts: 8
So, I have 3 zones and 2 tstats. I purchased a ZVC404 to clean things up.
If I want 1 tstat to call 2 zones, whats the best way to do that?
Zone valves are Honeywell V8043F.
Thanks.
a) jumper 2 tstats, and put each zone on its own.
b) wire zone valves in series or parallel?
If I want 1 tstat to call 2 zones, whats the best way to do that?
Zone valves are Honeywell V8043F.
Thanks.
a) jumper 2 tstats, and put each zone on its own.
b) wire zone valves in series or parallel?
0
Comments
-
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab1
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements