Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Weird problem with Nest & Mitsubishi heat pump

Hello everyone,
I use a Nest thermostat which is connected to Mitsubishi heat pump (PEAD-A42AA5) through Mitsubishi through Mitsubishi thermostat interface (PAC-US444CN-1). Cooling/fan starts, continues for 10-15 minutes and then suddenly I get an error on Nest saying that there is a problem with a specific wire. Each time it's a different wire. Cooling/fan stops for a few minutes. Then, I get another notification saying that equipment is detected and cooling/fan starts again. What might be the problem? I checked the wiring several times.
Thanks in advance,
Levent

Comments

  • STEVEusaPA
    STEVEusaPA Member Posts: 6,506
    The Nest
    steve
    IronmanSuperTech
  • Ironman
    Ironman Member Posts: 7,367
    Ditch the Nest; it should never be used with modulating equipment.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
    SuperTechSTEVEusaPA
  • SuperTech
    SuperTech Member Posts: 2,139
    Just because you can connect a Nest thermostat to the system doesn't mean that you should.  Use the thermostat that was designed for the equipment. 
    STEVEusaPA