Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

1 zone won’t stop at temp

Options
JoeM28
JoeM28 Member Posts: 2
in A-C, Heat Pumps & Refrigeration
I have a 2 zone hydro air system. One of the zones will not stop cooling once the temperature is reached as set on T-stat and the other zone won’t cool down enough- not a lot of air coming out of registers. The controller is an Aprilaire 6202. Any ideas on what the problem could be?

Comments

  • HVACNUT
    HVACNUT Member Posts: 5,841
    Options
    Thermostat 1 is controlling damper 2?

    Are they 2 or 3 wire dampers?
    JoeM28
  • JoeM28
    JoeM28 Member Posts: 2
    Options
    The damper is 2-wire. The light on it is not illuminated but it is on the other damper.
  • Big Ed_4
    Big Ed_4 Member Posts: 2,785
    edited June 2020
    Options
    Pull the thermostat on the problem zone see if the light go out , if yes thermostat is the problem . If no pull the other thermostat , if yes the zone control wires are crossed and if no you have a short in the wire...

    There was an error rendering this rich post.

    JoeM28

Categories