Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

weil mcclain 97+ hot water boiler - low water cut off open

Options
yogi802
yogi802 Member Posts: 6
my hot water boiler is not working, showing above error message
can some one help ASAP please
installed in 2013

Welcome

It looks like you're new here. Sign in or register to get started.

Comments

  • SuperTech
    SuperTech Member Posts: 2,603
    First thing I would do is check to make sure that the boiler has enough water in it. What does the pressure gauge read? Sometimes this problem can be the result of a dirty low water cutoff probe.
  • yogi802
    yogi802 Member Posts: 6
    how do i check water level ? sorry for my ignorance but this is first time i am having issue with WM97+
  • yogi802
    yogi802 Member Posts: 6
    pressure gage is about 10 psi now
    appears to me dropped from about 16-18 psi before ( luckily i have one picture to compare )

    hope this helps !!
  • icy78
    icy78 Member Posts: 406
    Did you check the install manual troubleshooting?
  • yogi802
    yogi802 Member Posts: 6
    yes but you can see asking to check water level - not sure how to do this ?
  • DZoro
    DZoro Member Posts: 1,048
    If it has been some time since it was serviced, now would be a good time to have a complete service/cleaning done to it.
    D

Welcome

It looks like you're new here. Sign in or register to get started.

Welcome

It looks like you're new here. Sign in or register to get started.