Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Check valve question.

JackW
JackW Member Posts: 236
in Radiant Heating
The circulators I bought for my radiant heat redo have check valves in them. The flow of all three circulators is down (outlet on the bottom) is there any reason to keep the check valves in the circulators?
Thanks.

Comments

  • DZoro
    DZoro Member Posts: 1,048
    Yes keep them in.
    It's helpful to others if you keep all your information on one post so everyone else can follow your project
    STEVEusaPA
  • JackW
    JackW Member Posts: 236
    @DZoro I don't understand what you mean by keeping all my info on one post. If I have a different subject matter don't I need a new thread?
    Thanks for the answering my question.
  • Ironman
    Ironman Member Posts: 7,753
    The checks are to prevent flow from one circuit from pushing into the ones that are off.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
    JackW
  • JackW
    JackW Member Posts: 236
    @Ironman. Wasn't sure if that would be a problem or not, thanks. In they will stay.
  • DZoro
    DZoro Member Posts: 1,048
    You can ask away, in the same post. It's easier for everyone to follow along with the project. And help you out.
    D
    JackW
  • JackW
    JackW Member Posts: 236
    Ah, didn't realize that. Thanks.

Categories