Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Pa. Heating oil sulfur content

Options
Ignatz
Ignatz Member Posts: 16
in Oil Heating
Did the sulfur content for #2 heating oil go down to 15 ppm? Just curious if the Pa. ruling went into effect.
Thanks

Comments

  • STEVEusaPA
    STEVEusaPA Member Posts: 6,505
    Options
    LS=low sulfur, < 500 ppm.
    ULS=ultra low sulfur, <15 ppm.
    ULS only mandated in Philadelphia. Technically still LS, everywhere else, but virtually no refinery carries LS any more, due to logistics, most just the carry the ULS.

    There was an error rendering this rich post.

  • Ignatz
    Ignatz Member Posts: 16
    Options
    Thanks Steve

Categories