Welcome! Here are the website rules, as well as some tips for using this forum.
If you've found help here, check back in to let us know how everything worked out.
It's a great way to thank those who helped you.
LOGO/ name plates boiler or furnace
Still need and will pay for name plates especially old ones.. need PENNCO . Replacxed many of these boilers and did not save the name plate logo. recently bought an Iron Fireman ash tray w/ the statue(3") on it. Cool huh? Somebody was weird like me and saved them.
0 ·
Comments
Absolute Mechanical Co. Inc.
www.AbsoluteMechanicalCoInc.com
Click here to learn more about this contractor.
Minnich Hydronic Consulting & Design
ST Johnson (still in business) we had some of there burners around here (I am in MA) and quite a few Ray burners, there both in California. Petro was big, Iron Fireman, I remember seeing some Ace rotary burners, a lot of Preferred Utilities, some York rotary's. Industrial Combustion, Power Flame, not to many Websters, Gordon Piatt
NEW: SlantFin Intrepid TR-30 + Tankless + Riello 40-F5 @ 0.85gph | OLD: Fitzgibbons 402 boiler + Beckett "SR" Oil Gun @ 1.75gph
installed: 0-20oz/si gauge | vaporstat | hour-meter | gortons on all rads | 1pc G#2 + 1pc G#1 on each of 2 mains
Connected EDR load: 371 sf venting load: 2.95cfm vent capacity: 4.62cfm
my NEW system pics | my OLD system pics
How do you get it back to default behavior where it only shows names (or bars) when in combat/engaged?
Setting them to 0 makes them never show up at all.
Also, setting these to 1 creates weird results in places like heist/bank missions:
Minnich Hydronic Consulting & Design
Mean while send a WILLIAMS OIL A MATIC, TORRID HEAT last owned by Cleveland steel products and Hydro Pulse model by "HYDRO THERM"
Just curious. That American Standard boiler that is coming out very soon.
Is that a screw driver that is hovering near or on the first regulator on the gas train? And why is it there?