Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

baseboard heating

egrosario
egrosario Member Posts: 2
I want to install a loop of my gas steam boiler.
I can I get away with a gravity loop instead of adding a circulation pump?
Is going to be two baseboards with the run being less than 25 ft.
Eloy G. Rosario

Welcome

It looks like you're new here. Sign in or register to get started.

Comments

  • HVACNUT
    HVACNUT Member Posts: 6,925
    Piping and wiring as a separate hydro zone is the way to go.
    STEAM DOCTOR
  • egrosario
    egrosario Member Posts: 2
    Thank you HVACNUT,
    I am going to pipe a separate loop with a bypass..
    What I am trying to do is go with a passive hot water loop.
    This is typically use for domestic. I was wondering if I can use this system along with a gravity loop in place of a circulating pump.
    Eloy G. Rosario
  • Jamie Hall
    Jamie Hall Member Posts: 26,236
    Problem is... with very little elevation difference, you'll get almost no flow at all. Use a pump.
    Br. Jamie, osb
    Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England
    JUGHNE
  • JUGHNE
    JUGHNE Member Posts: 11,480
    edited June 2019
    It takes elevation differential and also temperature differential.
    I have the gravity loop on my DHW and it achieves only a small trickle flow, good for DHW but not enough to heat BB. IMO

    You could pipe is as you talked and if it does not work just add a pump later.
  • Danny Scully
    Danny Scully Member Posts: 1,462
    edited June 2019
    You could also pipe the wet returns through the baseboard and this could act as you’re detailing.
  • HVACNUT
    HVACNUT Member Posts: 6,925
    > @HVACNUT said:
    > Piping and wiring as a separate hydro zone is the way to go.

    Why exactly "off topic" ?
  • STEAM DOCTOR
    STEAM DOCTOR Member Posts: 2,414
    > @HVACNUT said:
    > > @HVACNUT said:
    > > Piping and wiring as a separate hydro zone is the way to go.
    >
    > Why exactly "off topic" ?

    Probably a fat thumb. Hate to thing off how many times I have accidentally clicked the wrong tab
    HVACNUT

Welcome

It looks like you're new here. Sign in or register to get started.

Welcome

It looks like you're new here. Sign in or register to get started.