Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
W-M EG serving 2 steam kettles... too much rust
Options
wcs5050
Member Posts: 166
Condensate receiver in service. Regular attendance. “Normal” water consumption from well through filter. Piping to nearby steam kettles refitted by others and doesn’t seem correct in regards to trapped condensate. Hammers on fire up, then relaxes. Anybody know of any piping diagrams for this type of setup?
0
Comments
-
Google is thy friend. Page 10&11 have kettle specific info. Also good steam tables and references.
https://armstronginternational.com/files/common/technical/864-EN.pdf
1 -
Armstrong as @mikeg2015 pointed out is good.
I use Spirax Sarco book "Steam Utilization Hook Ups" Has diagrams for everything. You can find this online for free1
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements