Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Hydrosketch, export as image?

Options
Mike_Sheppard
Mike_Sheppard Member Posts: 698
in THE MAIN WALL
Is there any way to export a Hydrosketch drawing as an image? I read through the manual and searched for an option to do it but found none. I did a drawing that I wanted to post but I can't think of any other way to do it other than taking a screenshot.
Never stop learning.

Comments

  • Steve Minnich
    Steve Minnich Member Posts: 2,876
    I don't have it. Yet. So, I can't answer that.

    Is it as easy as advertised?
    Steve Minnich
  • Leonard
    Leonard Member Posts: 903
    edited February 2019
    For other stuff I hit "print screen" button on keyboard, to copy it to clipboard, then MS publisher (office) to clip off the junk I don't want.
  • Mike_Sheppard
    Mike_Sheppard Member Posts: 698
    @Leonard thank you. I will do that.
    Never stop learning.
  • ratio
    ratio Member Posts: 4,238
    There's also the snipping tool, stock with Windows since IIRC XP or so.
  • hot_rod
    hot_rod Member Posts: 27,472
    if you have a Mac, Option/ shift/ 4 gives you a crosshair, trace the sketch and it appears on your desktop.

    On my laptop I have Snip it works the same way.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
    Alan (California Radiant) Forbes

Categories