Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Buffer tank

Options
Jwil348
Jwil348 Member Posts: 1
in Gas Heating
Need help! I would like to turn my old 40 gallon electric water heater into a buffer tank. Is there any diagrams on how to do that? Thanks for the help

Comments

  • Ironman
    Ironman Member Posts: 7,376
    edited January 2019
    Options
    Remove the drain valve and put a Tee there for the inlet. Use the hot for the outlet after removing any plastic check or dip tube. Cap the cold.

    Whether you pipe it in series or use closely spaced Tees to inject into the supply or return depends upon how the rest of your system is designed and sized.

    I wouldn't use an old tank. You're cheaping out on something that's not that expensive and that could effect the rest of the system adversely.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
    STEVEusaPA
  • hot_rod
    hot_rod Member Posts: 22,157
    Options
    tell us a bit more about the project. What type of boiler, Size of smallest zone.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream

Categories