Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Homart 775.8816

Options
ksd99
ksd99 Member Posts: 77
edited January 2019 in THE MAIN WALL
I am changing out some vents on my radiators for my 1pipe steam system , can I use a Dole 1933 in place of the Homart 775.8816. The Homart appears to be a bit longer.
New owner of 1 Pipe Steam Boiler - learning all I can- no real steam pro in S.W. Michigan - if you know of 1 -let me know.

Comments

  • Steamhead
    Steamhead Member Posts: 16,842
    Options
    This is a steam system, correct?
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • nicholas bonham-carter
    nicholas bonham-carter Member Posts: 8,576
    Options
    If it is a steam system, then we like the Big Mouth, which is good for 50 feet of 2 inch pipe, at very low pressures, (1.5 psi, or lower for economy).
    Is your system a small household system?—NBC
  • ksd99
    ksd99 Member Posts: 77
    Options
    I have a 1 pipe steam system. I am not sure what you mean by a small household system, but my home is 350o sqft.
    New owner of 1 Pipe Steam Boiler - learning all I can- no real steam pro in S.W. Michigan - if you know of 1 -let me know.
  • ksd99
    ksd99 Member Posts: 77
    Options
    I should also clarify I am changing a vent on radiator
    New owner of 1 Pipe Steam Boiler - learning all I can- no real steam pro in S.W. Michigan - if you know of 1 -let me know.
  • nicholas bonham-carter
    nicholas bonham-carter Member Posts: 8,576
    Options
    Are you having some problems which would indicate a lack of venting?
    First verify your main vents to be working, and adequate, then check your radiator vents.
    Use slower vents on the radiators, and fast ones on the mains.—NBC

Categories