Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Grundfos Magna 3
kcopp
Member Posts: 4,419
I have a customer that has a magna 3 Delta p circulator in his system.
It has been intermittently having issues where the sensor apparently is bad.
I have the sensor but cant find any info available as to if it is a wet tapping that it fits into or a dry one.
thanks
It has been intermittently having issues where the sensor apparently is bad.
I have the sensor but cant find any info available as to if it is a wet tapping that it fits into or a dry one.
thanks
0
Comments
-
-
FYI... Its wet.
Pulled it out and got a squirt.
oh well.
I know now.
0 -
Sorry I missed this. FYI the sensors can get dirty in extreme conditions, they are very easy to wipe clean if necessary.0
-
thanks.
The system is a good sized one.
Im sure a good flush w/ some Fernox would be a good idea.... and some inhibitor after.
0
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 878 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements