Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Replacement burner tubes for old hot water furnace

I have a small apartment building with 2 hot water natural gas furnaces. Gaz industries GS 400 400K input 320K output
. They work well enough but the burner tubes have seen better days and the flame isn't as blue as it used to be. I would like to know where I could get replacement burner tubes. I know the furnaces are old and inefficient but they are very reliable and keep the 24 apartments toasty.

Thanks for any help.

John




Comments

  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,455
    Usually nothing much goes wrong with the tubes unless they are warped or damaged. Are they cast iron, aluminum or steel? I would suggest checking with the manufacturer if they are still in business. Looks like a Canadian product. Just working around the burners will stir up dust and change the flame color. I would check the boilers with a combustion analyzer. That will tell you what is going on. The burners may need just a good cleaning

    If they are not still around you may be out of luck. Possibly you could get enough good burner tubes to keep 1 running and replace 1 boiler at a time
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,455
    1-877-929-1214 telephone

    They are still in business and making the same type of boilers