Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Viega Propress and brass fittings. Will this work?
Options
BigErl
Member Posts: 38
Does anybody know if a Viega copper press fitting will work with a brass fitted copper by Uponor Propex adapter? I’d just like to confirm before potentially wasting 2 good fittings. Thanks.
1
Comments
-
-
-
I like it even more now that we have only Lead Free fittings, these fittings tend to leak if not PERFECTLY soldered. So a street fitting propress coupling and dont think about it again.
Tom
Montpelier Vt0 -
Bob Boan
You can choose to do what you want, but you cannot choose the consequences.0
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements