Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Slant fin Concept 21 gas valve

coryb
coryb Member Posts: 2
OK all you heating gurus out there ,apparently there are no replacement gas valves any longer for the Concept 21 boilers from Slant fin. I'm looking for a replacement, and i can't find 1 anywhere. I can't be the only one that has come across this problem. Slant Fin tells me , they have some fine new boilers and i should just replace the boiler !!!!!!! If you know of a place that can help me, please , let me know.... Thanks !!!!!!

Comments

  • Steamhead
    Steamhead Member Posts: 16,796
    What make and model is the valve?
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • coryb
    coryb Member Posts: 2
    The valve is a Robertshaw-Grayson
    7200DERN
    1/2 in 3/4 out
    straight through valve
    no pilot
    2 wire, 24 volt
    full wave, (what ever that means )
  • Steamhead
    Steamhead Member Posts: 16,796
    That appears to be a negative-pressure valve. Not sure who else makes them. If you're not a pro, best to call one.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Mad Dog_2
    Mad Dog_2 Member Posts: 6,832
    Ask Timmie Mc Elwain. He'll know the exact one,
    Cory. Are you a licensed plumber? Every municipality I know of requires a Master Plumber or gasfitters license to work on those. Mad Dog