Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

parallel and counter flow for one pipe steamer

Options
newagedawn
newagedawn Member Posts: 586
in Strictly Steam
did some customizing on an ole one pipe steamer, cut out like 40 feet of return and turned a main into a counter flow, but kept the other main parallel



"The bitter taste of a poor install lasts far longer than the JOY of the lowest price"

Comments

  • Danny Scully
    Danny Scully Member Posts: 1,465
    Come on big boy, you can work with 3” ips but you can’t thread 1”? :lol: jk
    newagedawn
  • New England SteamWorks
    New England SteamWorks Member Posts: 1,529
    edited April 2018
    How are you going to skim?
    New England SteamWorks
    Service, Installation, & Restoration of Steam Heating Systems
    newenglandsteamworks.com
  • newagedawn
    newagedawn Member Posts: 586
    like i always do, running the water slowly out the skim port after a week of operation, but if you noticed the gas valve isn't even hooked up yet, so be hard to skim it,lol
    "The bitter taste of a poor install lasts far longer than the JOY of the lowest price"
  • Danny Scully
    Danny Scully Member Posts: 1,465
    edited April 2018
    I think @New England SteamWorks was suggested he doesn’t see a skim port. Normally on those side outlet boilers you would install a tee there for skimming, or a nipple and cap on the other side if you’re not using both risers. I guess we’re just not seeing it in the pictures.
    newagedawn

Categories