Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Thermostat can't activate shared pump to boiler

Alex488
Member Posts: 1
So I got an ecobee thermostat in one zone and a regular old school thermostat in another zone. They share the same return pump to boiler. For whatever reason, the ecobee stopped being able to activate the pump. When I turned temp up on conventional thermostat, everything was fine including green light on relay board turned solid green, pump starts, heat comes. When I turned temp up on ecobee, the green light on relay board flickered but didn't go on, no pump, no heat. For me to get heat in zone controlled by ecobee, I have to turn temp way up in the other zone so the pump is running. Does anyone know what issue I am dealing with? Btw, it's been having this issues on and off recently
0
Comments
-
Does each thermostat open a zone valve? You may have a bad end switch on the zone with the. Ecobee.0
-
Insufficient data to make a analysis. Maybe the ecobee thermostat need a jumper between the R & RH. Did it work before and you are now experiencing problems or is it a new addition?0
-
Batteries in the Ecobee?Br. Jamie, osb
Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England0 -
Is the Ecobee 24v powered or just R-W? You might need a common or a resistor.0
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 946 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements