Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Boiler Mate

RayH
RayH Member Posts: 98
in Oil Heating
Any hints for why a Boiler mate hot water heater doesn't work ?

Comments

  • STEVEusaPA
    STEVEusaPA Member Posts: 6,506
    It's broke.
    steve
    unclejohnRayH
  • Grallert
    Grallert Member Posts: 644
    Pump, zone valve, control or the heat exchanger itself. There's a number of reasons. More details?
    Miss Hall's School service mechanic, greenhouse manager,teacher and dog walker
    kcoppRayH
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,517
    pictures
    RayH
  • RayH
    RayH Member Posts: 98
    I found a broken t-stat wire on the relay
    Grallert
  • rick in Alaska
    rick in Alaska Member Posts: 1,457
    I would have bet on the crappy digital control...
    Rick
  • HomerJSmith
    HomerJSmith Member Posts: 2,441
    Is the Amtrol Boilermate old or new. The older ones had a small heat exchanger with high head loss. But, you didn't specify why you think it didn't work. There is a boiler somewhere in the mix + a circulator + piping. It's just a storage tank with a heat exchanger. Can't get more simple than that.

    Gosh, maybe there is a valve closed somewhere.
  • HomerJSmith
    HomerJSmith Member Posts: 2,441
    You mean a sensor wire that's disconnected?
  • RayH
    RayH Member Posts: 98
    Thermostat wire in the Taco zone relay

Categories