Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Williams Oil-O-Matic "Hushed Heat"

Options
HeatingHelp
HeatingHelp Administrator Posts: 715
edited December 2017 in THE MAIN WALL

imageWilliams Oil-O-Matic "Hushed Heat"

Williams Oil-O-Matic "Hushed Heat"

Read the full story here


Comments

  • Andie
    Andie Member Posts: 1
    I would like to know where to find the year of installation on my Oil-O-Matic Boiler. Model # co-3 Serial # 10450
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 19,302
    Some of that old stuff was pretty good. Never saw or worked on one of those burners but had herd of them and we went over them at STCC using Charlie Burkhardt's book.

    Looking at the picture it's the first time I ever saw a burner installed in "the side" of the old round boiler with horizontal sections.

    I have seen cast iron boilers with vertical sections fired from the back. They said it was like giving the flame an extra pass

Categories