Welcome! Here are the website rules, as well as some tips for using this forum.

Need to contact us? Visit https://heatinghelp.com/contact-us/.

Click here to Find a Contractor in your area.

If our community has helped you, please consider making a contribution to support this website. Thanks!

Anybody recognize the manufacturer?

Options

Alan (California Radiant) Forbes

Alan (California Radiant) Forbes Member Posts: 4,643

November 2017 in THE MAIN WALL

This was in a house in Berkeley I visited today. Finned tube suspended under the joists to heat the floor above, circa 1958.

8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

Two btu per sq ft for degree difference for a slab

IMG_6350.JPG 23.7K

0

Comments

Steamhead Member Posts: 18,205

November 2017

Might be Kreitzer (or Krietzer). I remember that name somewhere, maybe in an old ASHVE Guide. Have to look it up.

All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting
0
Fred Member Posts: 8,542

November 2017

Looks pretty darn clean, whatever it is!

0
gschallert Member Posts: 170

November 2017

Kritzer Radiant Coils, Inc.

0
Alan (California Radiant) Forbes Member Posts: 4,643

November 2017

Thanks!

8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

Two btu per sq ft for degree difference for a slab
0