Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

William Wall Furnace Flame Roll Out on Ignition

zross108
zross108 Member Posts: 1
in Gas Heating
There seems to be some flame rollout when starting the wall furnace. Does this look normal?

https://youtu.be/3YDs0XM3DMc

Comments

  • Tim McElwain
    Tim McElwain Member Posts: 4,655
    There will always be a slight rollout. Once the burner is lit the flame should remain stable with a soft blue flame not roaring or lifting. The flame in the illustration is okay.
    zross108
  • newagedawn
    newagedawn Member Posts: 586
    could be a bad roll out, jump it and see
    "The bitter taste of a poor install lasts far longer than the JOY of the lowest price"
  • HVACNUT
    HVACNUT Member Posts: 6,772
    edited September 2017
    > @newagedawn said:
    > could be a bad roll out, jump it and see

    I didn't see one.
    Can't jump it. Fusible link. One and done.
  • JUGHNE
    JUGHNE Member Posts: 11,419
    "Rollout" in this context is a verb, not a noun.

    An action, not an item.

Categories