Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Is the Pressuretrol supposed to be level?
BCEAGLES
Member Posts: 27
After adjusting this per advice of others on the site to .5 cut in and 1 differential I noticed that it didnt seem to sit level. I put a level on top and its leaning toward the left. I checked the level of my furnace and its level. Is this an issue? I have attached a picture. 
0
Comments
-
Non-mercury so doesn't need to be 100% level. It's more visually nice if it's level.0
-
Thanks0
Categories
- All Categories
- 87.1K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 58 Biomass
- 427 Carbon Monoxide Awareness
- 117 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 111 Geothermal
- 163 Indoor-Air Quality
- 3.7K Oil Heating
- 72 Pipe Deterioration
- 1K Plumbing
- 6.4K Radiant Heating
- 393 Solar
- 15.5K Strictly Steam
- 3.4K Thermostats and Controls
- 55 Water Quality
- 51 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements