Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Is the Pressuretrol supposed to be level?
BCEAGLES
Member Posts: 27
After adjusting this per advice of others on the site to .5 cut in and 1 differential I noticed that it didnt seem to sit level. I put a level on top and its leaning toward the left. I checked the level of my furnace and its level. Is this an issue? I have attached a picture. 
0
Comments
-
Non-mercury so doesn't need to be 100% level. It's more visually nice if it's level.0
-
Thanks0
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 89 Chimneys & Flues
- 2K Domestic Hot Water
- 5.3K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 910 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements