Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

RPZ drafting symbol?

Options
Tinman
Tinman Member Posts: 2,808
edited May 2016 in THE MAIN WALL
Does anyone have a RPZ backflow preventor symbol that can be hand drawn they can share? I waited 2 weeks for a permit and it was denied because I drew a typical backflow symbol. I've found pictorial type drawings used in CAD but nothing that I can draw easily.
Steve Minnich

Comments

  • EzzyT
    EzzyT Member Posts: 1,295
    Options
    Stephen this should work
    E-Travis Mechanical LLC
    Etravismechanical@gmail.com
    201-887-8856
  • Tinman
    Tinman Member Posts: 2,808
    Options
    EzzyT - Thank you! The bottom drawing is pretty much what I gave them but they said it wasn't good enough. Piotr Zelasko is doing a CAD drawing of my piping schematic. Thanks again for the effort.
    Steve Minnich
    RJMCTAFO
  • EzzyT
    EzzyT Member Posts: 1,295
    Options
    That's what I've used on drawings in NYC and NJ and haven't had any issues with permits being approved. That's the exact same drawing that I have in my backflow test book, so it's interesting what they want different
    E-Travis Mechanical LLC
    Etravismechanical@gmail.com
    201-887-8856
    Tinman
  • Tinman
    Tinman Member Posts: 2,808
    Options
    I agree completely. I quit trying to figure out the people behind the curtain.
    Steve Minnich
  • Hilly
    Hilly Member Posts: 427
    Options
    This is what i have, a litttle different but not much.
    Tinman
  • Tinman
    Tinman Member Posts: 2,808
    edited May 2016
    Options
    @RJMCTAFO - I respect your right to disagree but unless you're the plumbing inspector for Lemont, IL and you're disputing the symbol I used, I have no idea what you're disagreeing to?
    Steve Minnich

Categories