Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
RPZ drafting symbol?
Options
Tinman
Member Posts: 2,808
Does anyone have a RPZ backflow preventor symbol that can be hand drawn they can share? I waited 2 weeks for a permit and it was denied because I drew a typical backflow symbol. I've found pictorial type drawings used in CAD but nothing that I can draw easily.
Steve Minnich
0
Comments
-
-
-
That's what I've used on drawings in NYC and NJ and haven't had any issues with permits being approved. That's the exact same drawing that I have in my backflow test book, so it's interesting what they want different1
-
I agree completely. I quit trying to figure out the people behind the curtain.Steve Minnich0
-
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements