Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Can anyone identify this old fixture
Rrey
Member Posts: 18
Maybe a purging station? Three 3/4 zone returns enter and 1 1/4 out the bottom to the boiler. Has a drain on one side and an air vent in the top. Also the 3 entering have dials for 1/4,1/2,3/4 and full. Balancing manifold. It's also embossed with HP1
0
Comments
-
I'm betting @Steamhead will know what it is.0
-
By the shape, it looks like an air eliminator. By the color, it looks like Bell & Gossett.8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab
1 -
Combination air separator and manifold, but I don't recognize the partial tag on it.All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
Sears?0
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 976 Plumbing
- 6.3K Radiant Heating
- 387 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements