Welcome! Here are the website rules, as well as some tips for using this forum.

Need to contact us? Visit https://heatinghelp.com/contact-us/.

Click here to Find a Contractor in your area.

Can anyone identify this old fixture

Rrey Member Posts: 18

February 2016 in THE MAIN WALL

Maybe a purging station? Three 3/4 zone returns enter and 1 1/4 out the bottom to the boiler. Has a drain on one side and an air vent in the top. Also the 3 entering have dials for 1/4,1/2,3/4 and full. Balancing manifold. It's also embossed with HP1

20160223_093531.jpg 3.3M

0

Comments

Fred Member Posts: 8,542

February 2016

I'm betting @Steamhead will know what it is.

0
Alan (California Radiant) Forbes Member Posts: 4,249

February 2016

By the shape, it looks like an air eliminator. By the color, it looks like Bell & Gossett.

8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

Two btu per sq ft for degree difference for a slab
1
Steamhead Member Posts: 17,509

February 2016

Combination air separator and manifold, but I don't recognize the partial tag on it.

All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting
0
Robert O'Connor_12 Member Posts: 728

February 2016

Sears?

0