Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

EBP-110

Options
dprcontracting
dprcontracting Member Posts: 7
in Radiant Heating
My just had to replace the anti- condensing valve for the 4th time since 2006. Is this a common problem? Seem like it is. $130.00 each, it's really adding up.

Comments

  • lchmb
    lchmb Member Posts: 2,997
    Options
    are you replacing the valve body or just the motor? Not a huge fan of the unit but have not seen that many failures on a single unit...Seems like your fixing the broken part but not finding the problem..
  • dprcontracting
    dprcontracting Member Posts: 7
    Options
    I replace both each time.
  • dprcontracting
    dprcontracting Member Posts: 7
    Options
    It seems to be in the fall during start up time. Not sure if the valve sticks from no use during the summer months, then it either strips the gears or breaks the plastic clip that goes over the valve stem. I think I'm going to start running a heat cycle once a month during the warm months. I another note, I think this units electronics should be separated from the heat source better. All the plastic plugs are so brittle and I worry about the circuit boards.

Categories