Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
beckett afg oil burner scratches
bigjohnO
Member Posts: 2
in Oil Heating
beckett aft oil burner recently starts and runs good for a short time then I hear scratching and it stops and eventually starts again and stops
0
Comments
-
burner is 8 years old serviced every year0
-
Squirrel cage, coupling, or a really bad motor. Do you see soot anywhere?0
-
Does this unit have a beckett Genisys?? with the add on a/c relay... if so .. that's the trouble.... IF .... you do not have a/c you can by pass it... if you do... then the board needs replaced0
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 110 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 978 Plumbing
- 6.3K Radiant Heating
- 387 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements