Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

What is you favorite method or product to seal pipe insulation at corners and tees?

Options
BigRob
BigRob Member Posts: 322
in THE MAIN WALL
I hate gaps in insulation. Any tips to insulate pro press long radius corners, regular radius corners, etc?

Comments

  • JohnNY
    JohnNY Member Posts: 3,230
    Options
    Yeah. Tell me, too.
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting & Troubleshooting
    Heating in NYC or NJ.
    Classes
    BigRob
  • Paul Pollets
    Paul Pollets Member Posts: 3,656
    edited December 2014
    Options
    hot melt glue gun, if you're obsessive. Using a good miter box with a serrated bread knife works best for cutting either fiberglass or neoprene. There's also white pookey that can be applied or white Zeston covers for fittings.
    BigRob
  • Ironman
    Ironman Member Posts: 7,376
    Options
    My favorite method? Use an insulation sub contractor. :smile:
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
    RobG
  • BigRob
    BigRob Member Posts: 322
    Options
    That's no fun!

Categories