Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

field cas4

Options
happydave
happydave Member Posts: 79
in THE MAIN WALL
For the life of me trying to wrap my head around wiring schematic. Have a fan in can being wired into Burnham 204, looks like I splice into red and white wires coming from/to vent damper, correct?

Comments

  • STEVEusaPA
    STEVEusaPA Member Posts: 6,505
    I copied this response from your other post...
    No, splice implies stripping the insulation, and tying all 3 wires together. Note the dotted lines (wire supplied by you)
    In reality you would remove the red/white from the vent damper and run the 2 wires to the T1 & T2 on the wiring block. Then get another 2 wire and run it from T2 & T3 on the block to the ignition module TR & TH respectively.

    There was an error rendering this rich post.

Categories