Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

\"Fan Motor for Homart Wall furnace direct vent\"

Options
Sew- kul
Sew- kul Member Posts: 9
in THE MAIN WALL
I am looking for a 115v. 1050 rpm. 3.5" diameter 1/20 hp. fan motor. Shaft is 1/4"x 2." Rotation is clockwise, looking at face. Any help would be much appreciated. I've tried the usual sources...Such as Dreisilker motor rebuilders, Grainger, A.O.Smith motors,General electric, Sears, and Magnatec.

Comments

  • Derheatmeister
    Derheatmeister Member Posts: 1,659
    Try Grainger

  • Jeff Lawrence_25
    Jeff Lawrence_25 Member Posts: 746


    That's already on his list....

    He may need to replace the wall furnace. He may, if he has the money available, get the motor rebuilt at a motor shop. He'll get out cheaper if he replaced the wall furnace.
  • Sew- kul
    Sew- kul Member Posts: 9
    motor needed

    try Johnstone supply if u have 1 in your area.
This discussion has been closed.

Categories