Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Converting Crown Boiler
Options
martin
Member Posts: 144
I'm going to convert a Crown CT3 boiler in a building I own. Two wholesalers have quoted me a Wayne P265FBB with conversion kit. Since not alot of oil is used in my area I have no experience in conversions.I'd like opinions on this burner and others.
0
Comments
-
Not a good choice
the Freeport CT boilers come with Beckett AFG or Riello burners, which can develop the static air pressure needed to fire the boiler. That Wayne burner can't do this as far as I know. I'd use a Carlin EZ-Gas or Riello gas burner.0 -
riello burner
Would you happen to have a model on the riello. Would it be the gulliver series ,having trouble with the riello site trying to find wholesalers.0 -
One of these
not sure exactly which one:
http://www.riello-burners.com/2_products/3_gas-burners/3a_40-series-gas-fired.asp0
This discussion has been closed.
Categories
- All Categories
- 87.8K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 430 Carbon Monoxide Awareness
- 130 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.8K Oil Heating
- 79 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 396 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements