Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

protection tubes?

Options
ChrisJ
ChrisJ Member Posts: 17,070
in Strictly Steam
I keep seeing things regarding protection tubes being needed for water probes on commercial boilers.



This seems like a good idea, why don't residential boilers have this as well?



For example : <a href="http://youtu.be/HG0M9wPDnzY">http://youtu.be/HG0M9wPDnzY</a>

Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.

Comments

  • BobC
    BobC Member Posts: 5,539
    Pressure?

    I'd guess that some commercial boilers are operating at high pressure so the danger of a bursting glass is a more serious concern.



    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
  • ChrisJ
    ChrisJ Member Posts: 17,070
    Nope

    The protection tube is to keep the LWCO probe in a calm environment like the gauge glass so it gets a more accurate reading.

    Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.

  • BobC
    BobC Member Posts: 5,539
    Money

    Well then it has to be the money, nobody wants to put anything on a boiler that doesn't increase sales to cover the cost - no matter how small.



    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
  • ChrisJ
    ChrisJ Member Posts: 17,070
    Sad

    Bob, isn't that sad that you could assume that and probably be 100% right?



    Probably the same reason there is no anode rod.

    Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.

This discussion has been closed.

Categories