Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Water pressure gauge reads zero on new gas boiler install

Options
BrianH
BrianH Member Posts: 7
in THE MAIN WALL
I just had a Burnham ESC 4 installed and it's running fine but the water pressure gauge is reading zero. It seems to be circulating water and is suppling heat, the LWCO light is green. Any thoughts? The contractor tells me it's the gauge and don't worry about it

Comments

  • tim smith
    tim smith Member Posts: 2,886
    Re: reading zero

    If you open a bleeder at a radiator on floor above the boiler and check for water, if water present you are ok. He can put a new gauge on later.  Stay warm and Happy New Year
  • BrianH
    BrianH Member Posts: 7
    Re

    Thanks, That makes me feel better, I felt the radiators and they were all warm, I'll bleed today and see what happens.
  • Steve Whitbeck
    Steve Whitbeck Member Posts: 669
    guage

    Make sure that the guage gets replaced. Should show approx. 12 PSI.
This discussion has been closed.

Categories