Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Buderus Logomatic 2107
Options
Optimus77
Member Posts: 1
Hello,
I just had my buderus G115WS/4 with logomatic 2107 last week. I took a peek at the "Hours Run" display on the logomatic and it currently read the number "4". I find it hard to believe that the burner ran for a total of 4 hours in a week, since I am not heating the house and it is in WWSD mode. I also hear the burner turn on from time to time, probably once every 4-5 hours with a run time of a couple of minutes at a time.
Any ideas of this?
Thanks
Sal
I just had my buderus G115WS/4 with logomatic 2107 last week. I took a peek at the "Hours Run" display on the logomatic and it currently read the number "4". I find it hard to believe that the burner ran for a total of 4 hours in a week, since I am not heating the house and it is in WWSD mode. I also hear the burner turn on from time to time, probably once every 4-5 hours with a run time of a couple of minutes at a time.
Any ideas of this?
Thanks
Sal
0
Comments
-
Do You Have an Indirect?
Did your installer set up the 2107? Is he trained on it?
The factory defaults are not a "one size fits all".Bob Boan
You can choose to do what you want, but you cannot choose the consequences.0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements