Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Is Peerless WBV03 enough to heat house and for 30 gallon Vaughn?
Options
MCarpenter
Member Posts: 12
Hi, I am getting ready to install a Peerless WBV03 with a coil for a friend tomorrow however I am skeptical if in the future should we decide to throw a 30 gallon Vaughn, will the boiler not be enough to heat the house? There is 200 ft. of baseboard, small house, well insulated, We already have the boiler. just wondering if I should return it, to avoid any problems.
(another thought) if the water lines going to house from boiler are 1/2" the 30 gallon Vaughn tank in the future would be a waste of money considering the velocity of water going throughout house is enough with just the coil??
(another thought) if the water lines going to house from boiler are 1/2" the 30 gallon Vaughn tank in the future would be a waste of money considering the velocity of water going throughout house is enough with just the coil??
0
Comments
-
Friend?
If you were a real friend,you'd do a heat loss and a friend wouldn't let a friend have a single pass coil boiler with the high idle loss that goes with it!0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements
