Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

flexible radint tubing

Options
bobby12
bobby12 Member Posts: 2
in Radiant Heating
looking for a flexible tubing oxygenbarrier for a radint system do not want to use the Watts Onix any ideas thank

Comments

  • kcopp
    kcopp Member Posts: 4,630
    Loads of choices....

    There are many Pex mfg... Uponor (wirsbo) is a great choice.
  • hot_rod
    hot_rod Member Posts: 26,599
    3/8 Uponor

    seems to be the most flexible pex I have installed. Warm it up in the sun or in front of a heater helps also.



    I have not tried any of the Pert tube, is it any more flexible?.



    If it is just a short section stainless corrugated solar tube is easy to shape. I would not do an entire radiant job with it.



    Rubber or EPDM hose could be isolated with a HX and non ferrous components.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Kent_3
    Kent_3 Member Posts: 60
    MrPex

    Check out mrpexsystems.com -- claimed to be the most flexible tubing
This discussion has been closed.

Categories